Bambu Lab cost per print: the real numbers

Bambu Lab printers — the A1, A1 mini, P1S, and X1 Carbon — changed the cost math for print sellers twice over. They print two to three times faster than the old bed-slingers, which lowers your cost per print. But their purge and poop waste, especially on multicolor jobs, can quietly raise it. If you price Bambu prints like Ender prints, you're leaving money in both directions. Here's the real cost breakdown.

1. The five things a Bambu print consumes

2. Worked example: phone stand on a P1S

A single-color phone stand: 45 g of PLA, 2.5-hour print, $19.99/kg filament.

Cost per print — P1S, single color
ComponentAmount
Filament (45 g @ $19.99/kg)$0.90
Purge waste (single color, ~10%)$0.09
Electricity (2.5 h @ ~120 W, $0.17/kWh)$0.05
Machine wear ($599 ÷ 2,500 h × 2.5 h)$0.60
Labor (10 min @ $15/hr)$2.50
Packaging$1.00
True cost per print$5.14

With a 50% margin on cost and ~12% Etsy fees, the list price lands around $8.75. Compare: the same stand on a slower printer at 6 hours would carry ~$1.44 in machine wear alone — the Bambu's speed saved nearly a dollar before you touched anything else.

3. The multicolor penalty (read this before selling AMS prints)

This is where Bambu sellers lose money. Every color change on an AMS print purges filament — and the slicer tells you exactly how much under "flushed." A four-color figurine can easily flush 2–5× the model's weight in purge. The rule:

For multicolor Bambu prints, cost the flushed volume, not just the model. Slicer says 40 g model + 120 g flushed? Your filament cost is 160 g — four times what the model alone suggests. Price multicolor at least 2–3× your single-color price for the same model, or reduce color changes (fewer swaps per layer, purge-to-infill) before quoting.

Quick estimating rule when you don't want to slice first: add 30–50% filament for two-color prints and 100–200% for four-color prints, then verify against the slicer's flushed number before finalizing the price.

4. Why speed is a pricing weapon

Machine wear is charged per hour, so a printer that finishes in 2.5 hours instead of 6 costs you less than half the wear per print — about $0.60 vs $1.44 in the example above. That saving is pure margin or pure competitive advantage: you can price $1 lower than a slower-printer seller and still keep more profit. When comparing Bambu models for a selling setup, run the same wear math: an A1 mini (~$199) at $0.08/hr wear is the cheapest cost-per-print in the lineup for small single-color items, while the P1S/X1C earn their keep on enclosed-material prints (ASA, ABS) you can charge a premium for.

Track filament per print, not per spool. Bambu's speed means you'll burn through spools fast, and "about $20 a spool" stops being precise enough when you're pricing dozens of SKUs. SpoolStock ($9.99, one-time) tracks every spool's remaining weight and true cost-per-gram so your filament numbers stay honest as prices move.

5. The 60-second Bambu quoting checklist

  1. Slice it — note model grams, flushed grams, and print hours.
  2. Filament cost = (model + flushed grams) × (spool price ÷ 1,000).
  3. Machine cost = print hours × (printer price ÷ 2,500).
  4. Add $0.02–0.05/hr electricity, 10 minutes of labor at your rate, and packaging.
  5. Add margin, gross up for marketplace fees, sanity-check against comparable listings.

Steps 2–5 are exactly what the free calculator does — including the flushed-filament line most pricing tools forget.

Price your Bambu prints in seconds

Our free 3D print pricing calculator handles filament + purge waste, machine wear, labor, and fees instantly in your browser. For per-spool filament tracking across your whole catalog, SpoolStock ($9.99, one-time) keeps every gram accounted for.

Try the free calculator Get SpoolStock on Etsy — $9.99