How much to charge for 3D printing per hour
"How much per hour?" is the first question every 3D-print seller asks — and the first one most get wrong. The trap is treating the printer's hour like your hour. Your printer running for eight hours overnight is not eight hours of your labor. Price it that way and a simple phone stand quotes at $120. The right approach splits the hour in two: a machine-hour rate for what the printer consumes, and a labor rate for what your hands do. Here's how to compute both.
1. The machine-hour rate: what one hour of printing really costs
Every hour your printer runs, it burns through four things. Add them up and you get the machine-hour rate — the floor below which you're subsidizing the customer:
- Depreciation: printer price ÷ expected lifetime hours. A $399 printer over a conservative 2,000-hour life = $0.20/hr.
- Electricity: watts ÷ 1,000 × your $/kWh. A typical bed-slinger at ~100 W and $0.17/kWh = $0.017/hr — call it two cents.
- Maintenance: nozzles, PTFE tubes, build plates, belts. Budget roughly $50–100 a year for a busy hobby printer; at 2,000 hours a year that's $0.03–0.05/hr.
- Failure buffer: not every print finishes. If roughly one print in ten fails partway, add ~10% on top of the three items above.
| Component | Per hour |
|---|---|
| Depreciation ($399 ÷ 2,000 h) | $0.20 |
| Electricity (100 W @ $0.17/kWh) | $0.02 |
| Maintenance (~$80/yr ÷ 2,000 h) | $0.04 |
| Subtotal | $0.26 |
| Failure buffer (+10%) | $0.03 |
| Machine-hour rate | $0.29 |
Round it to $0.30/hour. That's your cost — before filament, before your time, before profit.
2. The labor rate: price your hands, not the printer's
Your hands-on time per print is small but it's the most commonly skipped cost — and usually the biggest line item. Count slicing, plate prep, starting the print, support removal, QA, and packing. Most simple prints need 8–15 minutes of you.
Value that time at a rate you'd actually accept — $15/hr is a reasonable floor for skilled hobby labor, $20–25/hr if you're running it as a real side business. Ten minutes at $15/hr = $2.50 per print. Notice that's already more than eight hours of machine time ($2.40). This is why "charging per hour of printing" without separating labor produces nonsense quotes.
3. The full hourly quote formula
Put the two rates together with filament and you get the complete quote formula:
Quote = (machine rate × print hours) + (labor rate × hands-on hours) + filament cost + packaging, then add your margin and marketplace fees on top.
| Component | Amount |
|---|---|
| Machine time (7 h × $0.30) | $2.10 |
| Labor (12 min @ $15/hr) | $3.00 |
| Filament (60 g @ $19.99/kg, +10% waste) | $1.32 |
| Packaging | $1.00 |
| True cost | $7.42 |
Targeting a 50% margin on cost and selling on Etsy (roughly 12% all-in fees): list price ≈ $12.65. The "7 hours of printing" contributed just $2.10 — the printer's time was never the expensive part.
4. What do other sellers actually charge per hour?
For context, here's what the market looks like:
- 3D-print services & hubs typically quote $1–3 per machine-hour plus material — that's their machine rate with margin baked in, before labor.
- Etsy sellers rarely advertise hourly rates; the successful ones price per finished product using the formula above, which usually works out to an effective $1–2 per print-hour once labor and margin are included.
- Your floor is $0.30/hr machine cost. Anything between $0.30 and ~$1/hr of machine time is you deciding how much profit the printer itself should earn.
5. The minimum-order trick (don't skip this)
Pure hourly pricing breaks on short prints: a 45-minute keychain at $0.30/hr machine time quotes at $0.23 plus filament — less than the packaging. Fix it with a minimum order fee: a flat $3–5 that covers setup, handling, and packing regardless of print time. Quote = max(minimum fee, hourly formula). Every print service does this; hobby sellers should too.
6. Sanity-check against the market
After computing your hourly-based price, do one reality check: search Etsy for the finished item. If your formula says $12.65 and comparable listings sell at $14–18, you're healthy. If they sell at $8, don't just match it — that's the race to the bottom. Instead, cut print time (faster printer, thicker layers where finish allows), batch prints to spread labor, or pick a different product. The formula tells you the truth; the market tells you whether the product is worth selling.
Skip the spreadsheet
Our free 3D print pricing calculator runs the machine-hour rate, labor, filament, and fees instantly in your browser. For packaging, shipping, machine wear, batch runs, and break-even analysis, PrintPrice ($9.99, one-time) is the complete offline app.
Try the free calculator Get PrintPrice on Etsy — $9.99